Jewlery Photography Part 2
Within my last article, I went across the difficulties of photographing jewelry and exactly how difficult it is to find a regular appear and feel. One thing that made the biggest difference initially was utilizing a specific lighting tent. This tent measured about 17″ x 17″ x 17″ and was foldable, so very very portable from location to place. It has LED lighting stitched in and four different color backdrops. But this wasn’t one and only thing I needed. Although it gave me a company foundation to photograph, there have been other stuff I needed to do. So with Get one Here, I went returning to my client’s jewelry store to put together again. As earlier mentioned, the tent made a huge difference and provided a basis to operate from, but there was additional factors I discovered made a huge impact as well.
Here’s a run down of the things I did so to have consistent images each time. Firstly, I set my camera to manual mode. In this way I could specifically ensure nothing would change shoot to shoot. My white balance was adjusted accordingly, and I crafted a note of most my settings for future use, including how far back my camera was from your tent etc. I actually took a photograph using my iPhone to record this put in place for future use. Secondly, I used a macro tube extension set. This piece of equipment enabled me to have really close to every piece so that you can capture the maximum amount of detail as is possible. The best thing about using an extension set is I could possibly input it on my own zoom lens and also have the camera further back therefore i could access the tent easier minus the camera being in how. Now due to the extension set, I discovered one other issue. My depth of field was dramatically affected and so i had the situation of only one part of the piece being sharp, along with the rest out from focus. I really was required to fiddle using the settings to eliminate this as best I was able to, so a high f stop number was utilized, not to mention this led to the shutter being open for longer.
The tripod was essential. As was really a remote shutter release control that we purchased. This resulted in significantly better stability and eliminated your camera shake. The last thing I ensured was i photographed in RAW format to ensure that I needed the best image to use. I had been set as well as the outcomes of my images were a whole lot better. They 86dexmpky the standard the truth is in top professional shoots naturally, however they were certainly good enough for the small jewelry store around town. This was among the toughest projects I have got carried out my photographic life. I had to adjust so many things to have the desired results, and my usage of Lightroom afterwards played a huge role in developing the pictures. Because my put in place became consistent, my development settings also were consistent and enabled me to utilize exactly the same setting to every photograph. This is consistency at its finest.